Typical Malfunction Thresholds
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
CASE 1
| Following condition is met | 2 data areas or more |
| Any of the following conditions (a), (b) or (c) are met | More than 3 times |
| (a) EEPROM access error | Occurred |
| (b) Permanent fault code | Not stored |
| (c) Permanent fault code | Not equal to commanded fault code |
CASE 2
| Following condition is met | 2 data areas or more |
| Either of the following conditions (a) or (b) is met | More than 3 times |
| (a) EEPROM access error | Occurred |
| (b) Permanent fault code | Stored |
CASE 3
| Either of the following conditions is met | 1 or 2 |
| 1. Following condition is met | 2 data areas or more |
| (a) EEPROM access error occurred | More than 3 times |
| 2. Permanent Fault Code data mismatch | More than 10 times |