Removal [04/2018 -]: Procedure
WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)
Refer to PROCEDURE - Step 2 [04/2018 - 08/2021] , or refer to PROCEDURE - Step 2 [08/2021 -]
- REMOVE LOWER STEERING COLUMN COVER NOTE:
Removing the lower steering column cover in the incorrect order will cause the parts to break.
- for Manual Tilt and Manual Telescopic Steering Column:
- Release the tilt and telescopic lever and fully extend and lower the steering column assembly.
- Lock the tilt and telescopic lever.
- Turn the steering wheel assembly to the left and remove the screw.
- Turn the steering wheel assembly to the right and remove the screw.
- Remove the screw.
- Push the lower steering column cover and disengage the 2 claws as shown in the illustration.
Push - Disengage the 2 claws to remove the lower steering column cover.
- for Manual Tilt and Manual Telescopic Steering Column:
- REMOVE UPPER STEERING COLUMN COVER
- REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY