LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Prius XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Engine Control System (Service Information) [2GR-FKS]) >> ACTIVE CONTROL ENGINE MOUNT (for Rear Side) >> Removal [08/2021 - ] >> Procedure

Removal [08/2021 - ]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [08/2021 - ]

  2. REMOVE REAR ENGINE MOUNTING INSULATOR 
    1. Remove the bolt and rear engine mounting insulator from the rear engine mounting bracket.
      GTY763554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and wire harness clamp bracket from the rear engine mounting insulator.
      GTY763555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp and remove the vacuum hose from the rear engine mounting insulator.
      GTY763552Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals