LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Prius XLE >> Repair and Diagnosis >> External Pages >> Different car >> Section 202 (Steering Column (Service Information)) >> Steering Pad Switch >> Installation [04/2018 -] >> Procedure

Installation [04/2018 -]: Procedure

WARNING: This page is about a different car, the 2022 Toyota Avalon, 2021 Toyota Avalon, 2020 Toyota Avalon, and 2019 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws and 3 pins to install the steering pad switch assembly.
    2. Install the 2 screws.
    3. Connect the steering pad switch connector to the spiral cable with sensor sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [04/2018 - 08/2020] , or refer to INSTALLATION [08/2020 -]

scientia non olet · About LEMON Manuals