LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Prius XLE >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> HEADUP Display - Diagnostics - Introduction >> HEADUP Display System >> Customize Parameters [11/2015 - ] >> Customize Parameters [11/2015 - ]

Customize Parameters [11/2015 - ]

  1. CUSTOMIZE HEADUP DISPLAY SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Display.
      5. Select the setting by referring to the table below.
        NOTE:

        Be sure to record the current value before customizing.

        Display 

        Tester Display Description Default Setting ECU
        Master Caution Display Function Function to activate/deactivate the master warning light ON 0:OFF, 1:ON Combination meter mirror ECU
        Speed Limit Display Function Function to activate/deactivate the speed limit display ON 0:OFF, 1:ON Combination meter mirror ECU
scientia non olet · About LEMON Manuals