LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Prius LE AWD-e >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Disassembly [11/2015 -] >> Procedure

Disassembly [11/2015 -]: Procedure

  1. REMOVE COMBINATION METER GLASS 
    1. Remove the 9 bushes.
      GTY566554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 12 claws to remove the combination meter glass.
      GTY603733Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 1 COMBINATION METER COVER 
    1. Remove the 2 screws.
      GTY566555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 10 claws to remove the No. 1 combination meter cover.
  3. REMOVE NO. 1 COMBINATION METER PLATE 
    1. Disengage the 3 guides and remove the No. 1 combination meter plate.
      GTY590609Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 2 COMBINATION METER CASE 
    1. Remove the screw.
      GTY555972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 guides and remove the No. 2 combination meter case.
      GTY555968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 screws.
      GTY555971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 guides and disconnect the connector to remove the No. 2 combination meter case with combination meter multi-display as shown in the illustration.
      GTY540641Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
      NOTE:
      • Make sure to pull the connector straight up when disconnecting it as it is easily damaged.
      • Do not apply excessive force to the connector.
    5. Disengage the 2 guides to remove the combination meter multi-display from the No. 2 combination meter case as shown in the illustration.
      GTY608828Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  5. REMOVE NO. 2 METER CIRCUIT PLATE 
    1. Remove the 4 screws.
      GTY604254Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 4 guides to remove the No. 2 meter circuit plate as shown in the illustration.
      GTY566035Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  6. REMOVE METER CIRCUIT PLATE 
    1. Disengage the 4 claws and 4 guides.
      GTY568816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 4 claws and raise the 2 holders.
      GTY578504Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
      NOTE:

      Make sure not to rotate the holder 90° or more, or it may be damaged.

    3. Disconnect each connector to remove the TFT display from the meter circuit plate as shown in the illustration.
scientia non olet · About LEMON Manuals