LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System - Service Information >> Air Conditioning Panel >> Removal [06/2015 - ] >> Procedure

Removal [06/2015 - ]: Procedure

  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY 
    1. Install the protective tape.
      GTY594408Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
    2. Pull in the direction shown by the arrows in the illustration to disengage the clips and raise up the integration control and panel assembly.
      GTY544604Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hands Here
      Remove in this Direction
      NOTE:

      To avoid damaging the integration control and panel assembly or breaking the clips, do not lift up the integration control and panel assembly too much.

    3. Pull in the direction shown by the arrows in the illustration, disengage the claws, and disconnect the integration control and panel assembly.
      GTY551180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. Disengage the clamps and guide.
      GTY558583Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Guide
      *b Clamp
    5. Disconnect the 2 connectors to remove the integration control and panel assembly.
scientia non olet · About LEMON Manuals