Inspection [06/2015 - ]: Procedure

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check the resistance.

1. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   A-1 (BM1) - A-2 (GND1)	Always	Below 10 Ω
   B-2 (BM2) - B-1 (GND2)	Always	Below 10 Ω
   A-1 (BM1) - B-2 (BM2)	Always	Less than 1 Ω
   A-2 (GND1) - B-1 (GND2)	Always	Less than 1 Ω

   HINT: 

   If the result is not as specified, replace the brake booster pump assembly.