Removal [11/2018 - ]: Procedure
- PRECAUTION NOTE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Refer to INITIALIZATION [11/2018 - ]
- REMOVE FRONT DOOR BELT MOULDING ASSEMBLY
Refer to REMOVAL [11/2018 - ]
- REMOVE DOOR FRAME GARNISH
Refer to PROCEDURE - Step 26
- REMOVE FRONT DOOR CHECK ASSEMBLY
Refer to PROCEDURE - Step 41
- REMOVE FRONT DOOR WEATHERSTRIP
Refer to PROCEDURE - Step 44
- REMOVE FRONT DOOR WINDOW FRAME REAR MOULDING
See step 6
- REMOVE FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY
See step 7
- REMOVE FRONT DOOR OUTSIDE STRIPE
- REMOVE FRONT DOOR REAR OUTSIDE STRIPE