LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information >> License Plate Light Assembly >> Installation [06/2015 - ] >> Procedure

Installation [06/2015 - ]: Procedure

  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY 
    1. Engage the claws to install the license plate light assembly as shown in the illustration.
      GTY555143Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction

      HINT: 

      Use the same procedure as for the RH side.

    2. Connect the connector.
  2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY 

    Refer to INSTALLATION [06/2015 - ]

scientia non olet · About LEMON Manuals