DTC C1211-25: SLA Linear Solenoid; DTC C1212-26: SLR Linear Solenoid; DTC C1225-31: SA1 Solenoid Circuit; DTC C1226-32: SA2 Solenoid Circuit; DTC C1227-33: SA3 Solenoid Circuit; DTC C1228-34: STR Solenoid Circuit; DTC C1352-21: FR Solenoid; DTC C1353-23: RR Solenoid; DTC C1356-22: FL Solenoid; DTC C1357-24: RL Solenoid [06/2015 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [06/2015 - ]

   Chassis > ABS/VSC/TRAC > Clear DTCs 

2. Turn the power switch off.
3. Turn the power switch on (IG).
4. Check if the same DTC is output.

   Refer to DTC CHECK / CLEAR [06/2015 - ]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   HINT: 

   If a DTC for undervoltage is output, first troubleshoot the power source system.

   Result

   Result	Proceed to
   DTCs C1211/25, C1212/26, C1225/31, C1226/32, C1227/33, C1228/34, C1352/21, C1353/23, C1356/22 and C1357/24 are not output.	A
   Undervoltage DTC C1241/41 is output.	B
   DTCs C1211/25, C1212/26, C1225/31, C1226/32, C1227/33, C1228/34, C1352/21, C1353/23, C1356/22 and/or C1357/24 are output.	C

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ] 

Result: 

B 

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2015 - ] 

Result: 

C 

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY. Refer to  REMOVAL [06/2015 - 11/2018]  , or refer to  REMOVAL [11/2018 - ]