LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Service Information >> DOOR COURTESY LIGHT BULB (for Front Side) >> Replacement [06/2015 - ] >> Procedure

Replacement [06/2015 - ]: Procedure

  1. REMOVE COURTESY LIGHT ASSEMBLY 
    GTY545220Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *A Passenger Side
    *B Driver Side
    Protective Tape
    Remove in this Direction (1)
    Remove in this Direction (2)
    1. Apply protective tape as shown in the illustration.
    2. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and guide as shown in the illustration.
    3. Disconnect the connector to remove the courtesy light assembly.
  2. REMOVE COURTESY LIGHT BULB 
    1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
      GTY542361Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Courtesy Light Housing
      *2 Courtesy Light Cover
      *a Protective Tape
      Remove in this Direction
    2. Remove the courtesy light housing with courtesy light cover as shown in the illustration.
    3. Remove the courtesy light cover as shown in the illustration.
      GTY576071Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    4. Remove the courtesy light bulb as shown in the illustration.
      GTY579167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  3. INSTALL COURTESY LIGHT BULB 
    1. Install the courtesy light bulb as shown in the illustration.
      GTY596737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    2. Install the courtesy light cover as shown in the illustration.
      GTY589090Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
    3. Engage the claw to install the courtesy light housing with courtesy light cover as shown in the illustration.
      GTY550109Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Courtesy Light Housing
      *2 Courtesy Light Cover
      Install in this Direction
  4. INSTALL COURTESY LIGHT ASSEMBLY 
    1. Connect the connector.
    2. Engage the guide and claw to install the courtesy light assembly as shown in the illustration.
      GTY602811Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A Passenger Side
      *B Driver Side
      Protective Tape
      Install in this Direction (1)
      Install in this Direction (2)
    3. Remove the protective tape.
scientia non olet · About LEMON Manuals