DTC B2439: Headlamp LH Circuit; DTC B243A: Headlamp RH Circuit [06/2015 - ]: Procedure
- CLEAR DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 2
- Clear the DTCs.
- CHECK FOR DTC
- Turn the power switch on (IG).
- Inspect the light using the dimmer switch.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Trouble Codes
Result
Result Proceed to DTCs B2439 and B243A are not output A DTC B2439 is output B DTC B243A is output C
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]
Result:
C
See step 6
Result:
B
See step 3
- REPLACE HEADLIGHT UNIT ASSEMBLY LH
- Temporarily replace the headlight unit assembly LH with a new or normally functioning one.
Refer to REMOVAL [06/2015 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 4
- Temporarily replace the headlight unit assembly LH with a new or normally functioning one.
- CLEAR DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 5
- Clear the DTCs.
- CHECK FOR DTC
- Turn the power switch on (IG).
- Inspect the light using the dimmer switch.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Trouble Codes
Result
Result Proceed to DTC B2439 output does not occur A DTC B2439 output occurs B
Result:
A
END (HEADLIGHT UNIT ASSEMBLY LH WAS DEFECTIVE)
Result:
B
REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH. Refer to DISASSEMBLY [06/2015 - ]
- REPLACE HEADLIGHT UNIT ASSEMBLY RH
- Temporarily replace the headlight unit assembly RH with a new or normally functioning one.
Refer to REMOVAL [06/2015 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 7
- Temporarily replace the headlight unit assembly RH with a new or normally functioning one.
- CLEAR DTC
- Clear the DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Clear DTCs
Result
Proceed to NEXT
Result:
NEXT
See step 8
- Clear the DTCs.
- CHECK FOR DTC
- Turn the power switch on (IG).
- Inspect the light using the dimmer switch.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [06/2015 - 11/2018] , or refer to DTC CHECK / CLEAR [11/2018 - ]
Body Electrical > HL AutoLeveling > Trouble Codes
Result
Result Proceed to DTC B243A output does not occur A DTC B243A output occurs B
Result:
A
END (HEADLIGHT UNIT ASSEMBLY RH WAS DEFECTIVE)
Result:
B
REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH. Refer to DISASSEMBLY [06/2015 - ]