LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Automatic High Beam System - Diagnostics - Introduction >> Automatic High Beam System >> Fail-Safe Chart [11/2018 - ] >> Fail-Safe Chart [11/2018 - ]

Fail-Safe Chart [11/2018 - ]

  1. AUTOMATIC HIGH BEAM SYSTEM 
    1. The main body ECU (multiplex network body ECU) operates in fail-safe mode if an abnormal condition such as those listed below has been detected.
      Item Abnormality Detection Condition Return Condition Warning (Multi-information Display)
      Airbag Sensor Assembly Signal Malfunction Normal yaw rate signal is not detected. Normal yaw rate signal is detected. "Headlight System Malfunction Visit Your Dealer" message is displayed
      Forward Recognition Camera Signal Malfunction Normal forward recognition camera signal is not detected. Normal lane departure warning camera signal is detected. "Headlight System Malfunction Visit Your Dealer" message is displayed
      Speed Sensor Signal Malfunction Normal speed sensor signal is not detected. Normal speed sensor signal is detected. "Headlight System Malfunction Visit Your Dealer" message is displayed
      CAN Communication System Malfunction Normal CAN communication system is not detected. Normal CAN communication system is detected. "Headlight System Malfunction Visit Your Dealer" message is displayed
scientia non olet · About LEMON Manuals