Inspection [06/2015 - ]: Procedure

INSPECT REAR NO. 2 SPEAKER ASSEMBLY

With the rear No. 2 speaker assembly installed, check that there is no looseness or other abnormalities.
Check that there is no foreign matter in the rear No. 2 speaker assembly, no tears on the speaker cone or other abnormalities.

Check the resistance.

Measure the resistance of the speaker.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	Component without harness connected (Rear No. 2 Speaker Assembly)

Standard Resistance

Tester Connection	Condition	Specified Condition
1 - 2	Always	4.8 to 6.8 Ω

If the result is not as specified, replace the rear No. 2 speaker assembly.