LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Audio / Video System - Service Information >> Rear Door Speaker >> Inspection [06/2015 - ] >> Procedure

Inspection [06/2015 - ]: Procedure

  1. INSPECT REAR SPEAKER ASSEMBLY 
    1. Visually check the rear speaker assembly.

      OK

      The cone paper of the rear speaker assembly is not torn.

    2. Check the resistance.
      GTY596556Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Rear Speaker Assembly)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 - 2 Always Approximately 3.6 to 4.4 Ω

        If the result is not as specified, replace the rear speaker assembly.

scientia non olet · About LEMON Manuals