LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (Hybrid Control System (2WD) - Diagnostic Codes (7 Of 7) & Circuit Tests) >> HYBRID CONTROL SYSTEM (for 2WD) >> Drive Start Control [12/2019 - 10/2022] >> Description

Drive Start Control [12/2019 - 10/2022]: Description

WARNING: This page is about a different variant/trim than selected.

The drive start control is controlled by the hybrid vehicle control ECU.

If the hybrid vehicle control ECU determines that the shift lever and accelerator pedal are operated abnormally, hybrid system output is restricted and, when necessary, a warning is displayed on the combination meter assembly.

GTY855710Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002