LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 114 (Hybrid Control System (2WD) - Diagnostic Codes (4 Of 7)) >> HYBRID CONTROL SYSTEM (for 2WD) >> DTC P0ABF-2A: Hybrid/EV Battery Current Sensor "A" Signal Stuck In Range [12/2019 - 11/2023] >> Monitor Description

Monitor Description

WARNING: This page is about a different variant/trim than selected.

If the battery voltage sensor detects a malfunction in the battery current sensor, the hybrid vehicle control ECU will illuminate the MIL and store a DTC.