LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Automatic Transmission System (UA80F) - Service Information (1 Of 2)) >> Speed Sensor >> Installation [12/2019 - 10/2022] >> Procedure

Installation [12/2019 - 10/2022]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NC) 
    1. Install the transmission revolution sensor (NC) to the counter drive gear sub-assembly with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.

      Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [12/2019 - 10/2022] 

scientia non olet · About LEMON Manuals