LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Hybrid Control System - Diagnostic Codes (1 Of 5)) >> Hybrid Control System >> DTC P062F-44: Hybrid/EV Powertrain Control Module EEPROM Data Memory Failure [11/2023 - ] >> Procedure

DTC P062F-44: Hybrid/EV Powertrain Control Module EEPROM Data Memory Failure [11/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander and 2024 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (HEALTH CHECK) 
    1. Enter the following menus: System Select / Health Check.
    2. Check for DTCs.

      Result

      Result Proceed to
      P062F-44 is output from the hybrid control system. A
      P062F-44 is output from any system other than the hybrid control system. B
    3. Turn the ignition switch off.

    Result: 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [11/2023 - ] 

    Result: 

    GO TO PERFORM DIAGNOSIS FOR RESPECTIVE SYSTEM