LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Hybrid Control System - Diagnostic Codes (1 Of 5)) >> Hybrid Control System >> DTC P0606-94: Hybrid/EV Powertrain Control Module Processor Unexpected Operation [11/2023 - ] >> Procedure

DTC P0606-94: Hybrid/EV Powertrain Control Module Processor Unexpected Operation [11/2023 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander and 2024 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC OUTPUT (HYBRID CONTROL) 
    1. Check for DTCs.

      Powertrain > Hybrid Control > Trouble Codes 

      Result

      Result Proceed to
      P0606-94 only is output. A
      DTCs except P0606-94 are output. B
    2. Turn the ignition switch off.

    Result: 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [11/2023 - ] 

    Result: 

    GO TO DTC CHART (HYBRID CONTROL SYSTEM). Refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]