DTC P0014-00: Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1; DTC P0015-00: Camshaft Position "B" - Timing Over-Retarded Bank 1; DTC P05CE-00: Cold Start "B" Camshaft Position Timing Performance Bank 1 [10/2022 - 11/2023]: Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0013-13.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Note
P0014-00	Camshaft Position "B" - Timing Over-Advanced or System Performance Bank 1	Exhaust valve timing is stuck at a certain value when in the advance range (2 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for exhaust side) Exhaust camshaft timing gear bolt assembly Camshaft timing exhaust gear assembly ECM	Comes on	SAE Code: P0014
P0015-00	Camshaft Position "B" - Timing Over-Retarded Bank 1	Exhaust valve timing is stuck at a certain value when in the retard range (1 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for exhaust side) Exhaust camshaft timing gear bolt assembly Camshaft timing exhaust gear assembly ECM	Comes on	SAE Code: P0015
P05CE-00	Cold Start "B" Camshaft Position Timing Performance Bank 1	Target and actual valve timing do not match (2 trip detection logic).	Valve timing Cam timing oil control solenoid assembly (for exhaust side) Exhaust camshaft timing gear bolt assembly Camshaft timing exhaust gear assembly ECM	Comes on	SAE Code: P05CE