Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever the following DTCs are not stored |
None |
| All of the following conditions are met |
- |
| Battery voltage |
8 V or higher |
| Ignition switch |
ON |
| Starter |
Off |
| Solenoid current cut status |
Not cut |
CASE 1
| Target current |
0.2 A or more |
CASE 2
| Target current |
0.3 A or less |