LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Emission Control System (T24A-FTS) - Service Information) >> PCV Valve >> On-Vehicle Inspection [10/2022 - ] >> Procedure

On-Vehicle Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. GTY1106590Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove No. 1 engine cover sub-assembly.
      2. Start the engine.
      3. Slide the clip and disconnect the No. 2 ventilation hose from the air cleaner hose assembly.
      4. Check that air is sucked into the No. 2 ventilation hose.

        Standard

        Air is sucked into the No. 2 ventilation hose.

        If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).

scientia non olet · About LEMON Manuals