Inspection [10/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)
- Install a hose to the PCV valve (ventilation valve sub-assembly).
Procedure1
- Check the PCV valve (ventilation valve sub-assembly) operation.
- Blow air into the cylinder head sub-assembly side, and check that air passes through easily.
*a Hose *b Air Cylinder Head Sub-assembly Side WARNING:Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
- Blow air into the intake manifold side, and check that air passes through with difficulty.
*a Hose *b Air Intake Manifold Side WARNING:Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).
- Blow air into the cylinder head sub-assembly side, and check that air passes through easily.
- Remove the hose from the PCV valve (ventilation valve sub-assembly).
- Install a hose to the PCV valve (ventilation valve sub-assembly).