Typical Enabling Conditions
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
| All of the following conditions are met | - |
| Time after ignition switch off | 5 hours |
| Engine coolant temperature | -10°C (14°F) or higher |
| Engine oil temperature | -10°C (14°F) or higher |
| Time after ECM started by soak timer | 0.5 seconds or more |
| Ignition switch | Off |
| Battery voltage | Higher than 8 V |
| Engine coolant temperature sensor circuit fail (P0117, P0118) | Not detected |
| Engine oil temperature sensor circuit fail (P0197, P0198) | Not detected |
| Soak timer fail (P2610) | Not detected |