DTC P0125-00: Insufficient Coolant Temperature for Closed Loop Fuel Control [10/2022 - 11/2023]: Procedure

1. Read the DTCs.

   Powertrain > Engine > Trouble Codes 

   Result

   Result	Proceed to
   DTC P0125-00 is output	A
   DTC P0125-00 and other DTCs are output	B

   HINT: 

   If any DTCs other than P0125-00 are output, troubleshoot those DTCs first.

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023] 

Result: 

A 

See step  2

1. Inspect the engine coolant temperature sensor (for outlet side).

   Refer to INSPECTION [10/2022 - ]

   HINT: 

   Perform "Inspection After Repair" after replacing the engine coolant temperature sensor (for outlet side).

   Refer to INITIALIZATION [10/2022 - ]

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE ENGINE COOLANT TEMPERATURE SENSOR (FOR OUTLET SIDE). Refer to  REMOVAL [10/2022 - 11/2023] 

Result: 

OK 

See step  3

1. Inspect the engine coolant temperature sensor (for cylinder head side).

   Refer to INSPECTION [10/2022 - ]

   HINT: 

   Perform "Inspection After Repair" after replacing the engine coolant temperature sensor (for cylinder head side).

   Refer to INITIALIZATION [10/2022 - ]

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPLACE ENGINE COOLANT TEMPERATURE SENSOR (FOR CYLINDER HEAD SIDE). Refer to  REMOVAL [10/2022 - 11/2023] 

Result: 

OK 

See step  4

1. Check for defects in the engine cooling system that might cause the system to be too cold, such as abnormal cooling fan operation or any modifications.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE WATER CONTROL VALVE. Refer to  REMOVAL [10/2022 - ] 

Result: 

NG 

REPAIR OR REPLACE ENGINE COOLING SYSTEM