LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Control System (T24A-FTS) - Diagnostic Codes (02 Of 11)) >> SFI System >> DTC P011A-62: Engine Coolant Temperature Sensor 1/2 Signal Compare Failure; DTC P111A-62: Engine Coolant Temperature Sensor 1/3 Signal Compare Failure [10/2022 - ] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

P011A-62: 

After the engine has stopped for 5 hours or more, the ECM monitors the voltage of the engine coolant temperature sensor (for outlet side) and engine coolant temperature sensor (for cylinder head side). If the difference between the readings of the engine coolant temperature (for outlet side) and engine coolant temperature sensor (for cylinder head side) is higher than 20°C (36°F), the ECM determines that there is a malfunction in the engine coolant temperature sensor (for outlet side) circuit or engine coolant temperature sensor (for cylinder head side) circuit, and stores a DTC and illuminates the MIL.

P111A-62: 

After the engine has stopped for 5 hours or more, the ECM monitors the voltage of the engine coolant temperature sensor (for outlet side) and engine coolant temperature sensor (for water inlet housing side). If the difference between the readings of the engine coolant temperature (for outlet side) and engine coolant temperature sensor (for water inlet housing side) is higher than 20°C (36°F), the ECM determines that there is a malfunction in the engine coolant temperature sensor (for outlet side) circuit or engine coolant temperature sensor (for water inlet housing side) circuit, and stores a DTC and illuminates the MIL.