DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2022 - 11/2023]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0110-2A)

Read the DTCs.

Powertrain > Engine > Trouble Codes

Result

Result	Proceed to
DTC P0110-2A and other DTCs are output	A
DTC P0110-2A is output	B

HINT:

If any DTCs other than P0110-2A are output, troubleshoot those DTCs first.
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Refer to INITIALIZATION [10/2022 - ]

Result:

GO TO DTC CHART. Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023]

Result:

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY. Refer to REMOVAL [10/2022 - ]