LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Engine Control System (T24A-FTS) - Diagnostic Codes (02 Of 11)) >> SFI System >> DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2022 - 11/2023] >> Description

DTC P0110-2A: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range [10/2022 - 11/2023]: Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0110-11.

Refer to DESCRIPTION 

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0110-2A Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range Either of the following conditions is met (2 trip detection logic):
  • The intake air temperature change from the previous trip warm up to the following trip is small.
  • The change in the intake air temperature after engine start is less than the threshold value.
 Mass air flow meter sub-assembly Comes on SAE Code: P0111
scientia non olet · About LEMON Manuals