DTC P0105-11: Manifold Absolute Pressure / Barometric Pressure Sensor Circuit Short to Ground [10/2022 - ]: Description
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
The No. 1 turbo pressure sensor detects the intake manifold pressure as a change in voltage. The ECM calculates the intake manifold pressure based on this voltage.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| P0105-11 | Manifold Absolute Pressure / Barometric Pressure Sensor Circuit Short to Ground | The No. 1 turbo pressure sensor output voltage is less than 0.9 V for 3 seconds or more (1 trip detection logic). |
|
Comes on | SAE Code: P0107 |
HINT:
When this DTC is output, check the intake manifold absolute pressure in the Data List. Enter the following menus: Powertrain / Engine / Data List / Intake Manifold Absolute Pressure.
| DTC No. | Intake Manifold Absolute Pressure | Malfunction |
|---|---|---|
| P0105-11 | Approximately 5 kPa (0.725 psi) |
|
If the Data List value is normal it may be due to a temporary recovery from the malfunction condition. Check for intermittent problems.