LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Cooling System (T24A-FTS) - Service Information) >> Water Control Valve >> On-Vehicle Inspection [10/2022 - ] >> Procedure

On-Vehicle Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT WATER CONTROL VALVE 
    1. Read the Data List when the water control valve is operated.

      Powertrain > Engine > Active Test 

      Active Test Display
      Control the Multi Flow Control Valve Position
      Data List Display
      Actual Multi Flow Control Valve Position

      OK

      The value of the Data List item "Actual Multi Flow Control Valve Position" follows the command value and changes smoothly when the Active Test is operated in all ranges.