LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Cooling System (T24A-FTS) - Service Information) >> Water Control Valve >> Inspection [10/2022 - ] >> Procedure

Inspection [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT WATER CONTROL VALVE 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      5 (FCM+) - 4 (FCM-) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the water control valve.

      GTY1066612Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Water Control Valve)
scientia non olet · About LEMON Manuals