LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Control System (T24A-FTS) - Diagnostic Codes (06 Of 11)) >> SFI System >> DTC P0606-94: Control Module Processor Unexpected Operation [10/2022 - 11/2023] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The ECM calculates the accelerator pedal opening angle value used for control and the value used for monitoring. If the ECM determines there is an excessive output while the engine is running, a DTC is stored and the MIL is illuminated.

scientia non olet · About LEMON Manuals