LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Control System (T24A-FTS) - Diagnostic Codes (06 Of 11)) >> SFI System >> DTC P0606-47: Control Module Processor Watchdog/Safety MCU Failure [10/2022 - 11/2023] >> Monitor Description

Monitor Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The ECM continuously monitors its main CPU and monitor IC. This self-check ensures that the ECM is functioning properly. If outputs from main CPU and monitor IC are different and deviate from the standard, the ECM will illuminate the MIL and store this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0606-47 Control Module Processor Watchdog/Safety MCU Failure ECM main CPU malfunction (1 trip detection logic). ECM Comes on SAE Code: P0606