LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Control System (T24A-FTS) - Diagnostic Codes (05 Of 11)) >> SFI System >> DTC P0500-31: Vehicle Speed Sensor "A" No Signal [11/2023 - ] >> Description

DTC P0500-31: Vehicle Speed Sensor "A" No Signal [11/2023 - ]: Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The skid control ECU (brake actuator assembly) converts the vehicle speed pulse signals output from the speed sensors installed to each wheel into vehicle speed signals. It then inputs these signals to the ECM as speed signals via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Note
P0500-31 Vehicle Speed Sensor "A" No Signal The SPD vehicle speed signal from the skid control ECU (brake actuator assembly) is 0 km/h (0 mph) or less while driving (2 trip detection logic).
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • ECM
Comes on SAE Code: P0500