LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Automatic Transmission System (UA81E / UA81F) - Service Information (1 Of 2)) >> Pattern Select Switch >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 PATTERN SELECT SWITCH ASSEMBLY 
    1. Install the No. 1 pattern select switch assembly to the console panel sub-assembly with the 4 screws.
    2. Engage the clamp.
    3. Connect the 2 No. 1 pattern select switch assembly connectors.
  2. INSTALL SNOW SWITCH (PATTERN SELECT SWITCH) 
    1. Engage the 2 claws to install the snow switch (pattern select switch) to the console panel sub-assembly.
    2. Connect the snow switch (pattern select switch) connector.
  3. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9

  4. INSTALL FRONT CONSOLE BOX COVER 

    Refer to PROCEDURE - Step 11

  5. INSTALL CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 12

  6. INSTALL NO. 2 CONSOLE BOX CUSHION 

    Refer to PROCEDURE - Step 13

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    See step  1

scientia non olet · About LEMON Manuals