LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Battery / Charging System (T24A-FTS) - Service Information) >> Generator >> Removal [10/2022 - 11/2023] >> Procedure

Removal [10/2022 - 11/2023]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 1

  2. DRAIN COOLANT (for Intercooler) 

    Refer to REPLACEMENT [10/2022 - ]

  3. REMOVE V-RIBBED BELT 

    Refer to REMOVAL [10/2022 - ]

  4. DISCONNECT NO. 2 INTERCOOLER COOLING WATER HOSE 
    1. GTY1106229Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT NO. 3 INTERCOOLER COOLING WATER HOSE 
    1. GTY1106232Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE INTERCOOLER RESERVE TANK ASSEMBLY 
    1. GTY1106231Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. DISCONNECT ENGINE WIRE 
    1. GTY1106228Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE GENERATOR ASSEMBLY 
    1. GTY1104794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 nuts and bolt.
      2. Using an E8 "TORX" socket wrench, remove the stud bolt and generator assembly.
scientia non olet · About LEMON Manuals