On-Vehicle Inspection [10/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE V-RIBBED BELT
Refer to REMOVAL [10/2022 - ]
- INSPECT GENERATOR PULLEY WITH CLUTCH
- Check that the generator pulley with clutch operates in accordance with the following table.
Counterclockwise Clockwise Standard
Counterclockwise Clockwise Spins Freely Lock HINT:
If the generator pulley with clutch does not turn smoothly, does not operate as specified, or an abnormal sound is output, replace it with a new one.
- Check that the generator pulley with clutch operates in accordance with the following table.
- INSTALL V-RIBBED BELT
Refer to INSTALLATION [10/2022 - ]