Installation [10/2022 - 11/2023]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL BATTERY STATE SENSOR ASSEMBLY
Nut (A)
Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf)
Nut (B)
Torque: 7.6 N.m (77 kgf/cm, 67 in.lbf)
NOTE:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Refer to INITIALIZATION [10/2022 - 11/2023]