Installation [10/2022 - ]: Procedure
WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL FRONT EXHAUST PIPE ASSEMBLY
Torque: 43 N.m (438 kgf/cm, 32 ft.lbf)
- INSTALL TAIL EXHAUST PIPE ASSEMBLY
Torque: 43 N.m (438 kgf/cm, 32 ft.lbf)
- INSPECT FOR EXHAUST GAS LEAK
- If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.
HINT:
Perform "Inspection After Repair" after repairing an exhaust gas leak.
Refer to INITIALIZATION [10/2022 - ]
- If gas is leaking, tighten the areas necessary to stop the leak. Replace damaged parts as necessary.