Caution / Notice / Hint
WARNING: This page is about a different car, the 2025 Toyota Highlander and 2024 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.
Refer to CALIBRATION [11/2023 - ]
- If a DTC is detected again after the repair, turn the ignition switch to ON and turn the intuitive parking assist system on, and then clear the DTC.
- If C1AE3-96 is output at the same time, check C1AE3-96 first.
Refer to CAUTION / NOTICE / HINT