LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Lubrication System (T24A-FTS) - Service Information) >> Oil Pressure Switching Valve >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 12 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 12 [11/2023 - ]

  2. DISCONNECT ENGINE WIRE 
    1. GTY1106225Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. GTY1103382Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the oil pressure control valve assembly connector.
      2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals