LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Lubrication System (T24A-FTS) - Service Information) >> Engine Oil Cooler >> Removal [10/2022 - 11/2023] >> Procedure

Removal [10/2022 - 11/2023]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE CONVERTER WITH CATALYST ASSEMBLY 

    Refer to REMOVAL [10/2022 - 11/2023]

  2. REMOVE EXHAUST PIPE HEAT INSULATOR 
    1. GTY1075126Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. DISCONNECT WATER BY-PASS HOSE 
    1. GTY1075128Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE OIL COOLER ASSEMBLY 
    1. GTY1075130Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE OIL COOLER GASKET 
    1. GTY1075132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE OIL COOLER PIPE GASKET 
    1. GTY1075803Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals