LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Battery / Charging System (T24A-FTS) - Diagnostic Codes & Symptom Tests) >> Charging System >> DTC P162B-87: Lost Communication with Battery Monitor Module Missing Message [10/2022 - ] >> Description

DTC P162B-87: Lost Communication with Battery Monitor Module Missing Message [10/2022 - ]: Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

The ECM communicates with the battery state sensor assembly via LIN communication. If a LIN communication error is detected, the ECM stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate Note
P162B-87 Lost Communication with Battery Monitor Module Missing Message Battery state sensor assembly or ECM communication stops for approximately 60 seconds or more with the ignition switch ON
(2 trip detection logic)
  • Wire harness or connector
  • Battery state sensor assembly
  • ECM
Comes on Charge warning light does not come on SAE Code: P162B