LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Control System (T24A-FTS) - Service Information) >> Vacuum Sensor >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL VACUUM SENSOR ASSEMBLY 

    Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 56 [10/2022 - 11/2023] , or refer to PROCEDURE - Step 56 [11/2023 - ]

scientia non olet · About LEMON Manuals