LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Starting System (T24A-FTS) - Service Information) >> Engine Switch >> Installation [10/2022 - ] >> Procedure

Installation [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ENGINE SWITCH 
    1. Engage the 2 claws to install the engine switch.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT 

    Refer to PROCEDURE - Step 3

  3. INSTALL FRONT CONSOLE BOX INSERT 

    Refer to PROCEDURE - Step 4

  4. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 6

  5. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 15

  7. INSTALL INSTRUMENT PANEL FINISH END PANEL RH 

    Refer to PROCEDURE - Step 16

  8. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 1

  9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 49

  10. INSTALL FRONT DOOR SCUFF PLATE RH 

    HINT: 

    Use the same procedure as for the LH side.

    Refer to PROCEDURE - Step 50

  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 20

  12. INSTALL RADIO AND DISPLAY ASSEMBLY WITH AIR CONDITIONING CONTROL 

    for 8 Inch Display:

    Refer to PROCEDURE - Step 5

    for 12.3 Inch Display:

    Refer to PROCEDURE - Step 11

  13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23

  14. INSTALL NO. 1 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 25

  15. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 28

  16. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 36

  17. INSTALL TRIP SWITCH 

    Refer to PROCEDURE - Step 1

  18. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 38

  19. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY 

    Refer to PROCEDURE - Step 39

  20. INSTALL INSTRUMENT PANEL FINISH END PANEL LH 

    Refer to PROCEDURE - Step 40

  21. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 1

  22. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 49

  23. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 50

  24. INSTALL CONSOLE BOX ASSEMBLY 

    Refer to INSTALLATION [10/2022 - ]

scientia non olet · About LEMON Manuals