LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Meter / Gauge System (12.3 Inch Display) - Diagnostic Codes & Circuit Tests) >> METER / GAUGE SYSTEM (for 12.3 Inch Display) >> Tachometer Malfunction [10/2022 - ] >> Procedure

Tachometer Malfunction [10/2022 - ]: Procedure

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION SYSTEM 
    1. Check if CAN communication DTCs are output.

      Refer to DIAGNOSIS SYSTEM [10/2022 - 11/2023] , or refer to DIAGNOSIS SYSTEM [11/2023 - ]

      Result

      Result Proceed to
      CAN communication DTCs are not output A
      CAN communication DTCs are output B

    Result: 

    GO TO CAN COMMUNICATION SYSTEM 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 11/2023] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2023 - ]

    Result: 

    See step  2

  2. CHECK FOR DTC (SFI SYSTEM) 
    1. Check if SFI system DTCs are output.

      Powertrain > Engine > Trouble Codes 

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    GO TO SFI SYSTEM 

    Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2022 - 11/2023] , or refer to DIAGNOSTIC TROUBLE CODE CHART [11/2023 - ]

    Result: 

    See step  3

  3. PERFORM ACTIVE TEST USING GTS 
    1. Perform the Active Test according to the display on the GTS.

      Body Electrical > Combination Meter > Active Test 

      Tester Display Measurement Item Control Range Diagnostic Note
      TachoMeter Operation (0rpm) Tachometer
      (0 rpm)
      ON -
      TachoMeter Operation (1000rpm) Tachometer
      (1000 rpm)
      ON -
      TachoMeter Operation (2000rpm) Tachometer
      (2000 rpm)
      ON -
      TachoMeter Operation (3000rpm) Tachometer
      (3000 rpm)
      ON -
      TachoMeter Operation (4000rpm) Tachometer
      (4000 rpm)
      ON -
      TachoMeter Operation (5000rpm) Tachometer
      (5000 rpm)
      ON -
      TachoMeter Operation (6000rpm) Tachometer
      (6000 rpm)
      ON -
      TachoMeter Operation (7000rpm) Tachometer
      (7000 rpm)
      ON -
      TachoMeter Operation (8000rpm) Tachometer
      (8000 rpm)
      ON -

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (0rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (1000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (2000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (3000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (4000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (5000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (6000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (7000rpm)

      Body Electrical > Combination Meter > Active Test 

      Tester Display
      TachoMeter Operation (8000rpm)

      OK

      Tachometer indication is normal.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    GO TO SFI SYSTEM 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - ]

    Result: 

    NG 

    REPLACE COMBINATION METER ASSEMBLY 

    Refer to REMOVAL [12/2019 - ]