LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Highlander L, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Meter / Gauge System (12.3 Inch Display) - Diagnostic Codes & Circuit Tests) >> METER / GAUGE SYSTEM (for 12.3 Inch Display) >> DTC B1508-19: Turn Signal/Hazard Flasher Circuit Current Above Threshold [11/2023 - ] >> Description

DTC B1508-19: Turn Signal/Hazard Flasher Circuit Current Above Threshold [11/2023 - ]: Description

WARNING: This page is about a different car, the 2025 Toyota Highlander, 2024 Toyota Highlander, and 2023 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

This DTC is stored when the combination meter assembly detects a short in a turn signal light circuit.

HINT: 

If there is a short in a turn signal light circuit, all of the turn signal lights in that circuit will not blink.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1508-19 Turn Signal/Hazard Flasher Circuit Current Above Threshold Diagnosis Condition:
  1. Auxiliary battery voltage is 10 V or more

Malfunction Status:

  1. Short in turn signal light circuit
  • Headlight assembly
    • Headlight ECU sub-assembly*1
    • Front turn signal light socket
    • Front turn signal light bulb
  • Outer mirror control ECU assembly*2
  • Outer rear view mirror assembly
    • Side turn signal light assembly
  • Device connected to option connector (trailer towing)*3
  • Rear combination light assembly
    • Rear combination light cord
    • Rear turn signal light socket
    • Rear turn signal light bulb
  • Harness or connector
  • Combination meter assembly
  1. *1: w/ AFS
  2. *2: w/ Seat Position Memory
  3. *3: w/ Option Connector (Trailer Towing)