LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Corolla L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 71 (Engine Cooling System (M20A-FKS) - Service Information) >> THERMOSTAT (w/o Cooling Fan ECU) >> Removal [06/2018 - 11/2022] >> Procedure

Removal [06/2018 - 11/2022]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE WATER PUMP ASSEMBLY (WATER INLET HOUSING) 

    Refer to REMOVAL [06/2018 - 11/2022] 

  2. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY 
    1. Using an 8 mm socket wrench, remove the 2 bolts and water inlet with thermostat sub-assembly.
      GTY841505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the gasket from the water inlet with thermostat sub-assembly.
      GTY771402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals